How do I put black ink into my HP printer?

I have a


HP PSC 2355xi all-in-one


printer~scanner~copier








It ran out of black ink and I can't find where the ink is stored!





Can anyone help me?How do I put black ink into my HP printer?
If you have the User's Guide in reach, get it.


Otherwise click on the link below and on the webpage choose ';User's Guide';.





Go to page 85 where the procedure is explained.How do I put black ink into my HP printer?
1 Make sure the HP all-in-one is on.


Warning If the HP all-in-one is off when you lift the print-carriage access


door to access the print cartridges, the HP all-in-one will not release the


cartridges for changing. You might damage the HP all-in-one if the print


cartridges are not docked safely on the right side when you try to remove


them.


2 Open the print-carriage access door by lifting from the front center of the device,


until the door locks into place.


The print carriage moves to the far right side of the HP all-in-one.


1 Print-carriage access door


2 Print carriage


3 Wait until the print carriage is idle and silent, and then lightly press down on a print


cartridge to release it.


If you are replacing the tri-color print cartridge, remove the print cartridge from the


slot on the left.


If you are replacing the black or photo print cartridge, remove the print cartridge


from the slot on the right.


User Guide 83


Maintain your HP all-in-one


1 Print cartridge slot for the tri-color print cartridge


2 Print cartridge slot for the black and photo print cartridges


4 Pull the print cartridge toward you out of its slot.


5 If you are removing the black print cartridge in order to install the photo print


cartridge, store the black print cartridge in the print cartridge protector. For more


information, see Use the print cartridge protector.


If you are removing the print cartridge because it is low or out of ink, recycle the


print cartridge. The HP Inkjet Supplies Recycling Program is available in many


countries/regions, and lets you recycle used print cartridges free of charge. For


more information, go to the following website:


www.hp.com/hpinfo/globalcitizenship/en鈥?br>

6 Remove the new print cartridge from its packaging and, being careful to touch only


the black plastic, gently remove the plastic tape by using the pink pull tab.


1 Copper-colored contacts


2 Plastic tape with pink pull tab (must be removed before installing)


3 Ink nozzles under tape


Caution Do not touch the copper-colored contacts or ink nozzles.


Touching these parts can result in clogs, ink failure, and bad electrical


connections.


Chapter 12


84 HP PSC 2350 series all-in-one


Maintain your HP all-in-one


7 Slide the new print cartridge forward into the empty slot. Push the print cartridge


forward until it clicks into place.


If the print cartridge you are installing has a white triangle on its label, slide the


print cartridge into the slot on the left. The label for the slot is green with a solid


white triangle.


If the print cartridge you are installing has a white square or a white pentagon on its


label, slide the print cartridge into the slot on the right. The label for the slot is black


with a solid white square and a solid white pentagon.


8 Close the print-carriage access door.


U